Welcome to the Diamond Infinite Edge Pro Manual, your essential guide to mastering this versatile compound bow. This manual provides comprehensive instructions for setup, tuning, and maintenance to ensure optimal performance and safety.
Whether you’re a seasoned archer or a beginner, this guide will help you unlock the full potential of your Infinite Edge Pro, ensuring precise shots and durability.
1.1 Overview of the Diamond Infinite Edge Pro Compound Bow
The Diamond Infinite Edge Pro is a highly versatile compound bow designed for both hunting and recreational archery. It features an adjustable draw length of 13-31 inches and a draw weight that can be reduced to as low as 22 lbs, making it suitable for archers of all skill levels.
With an IBO speed of 310 FPS and a mass weight of 3.2 lbs, this bow offers a balance of power and portability. Its 31-inch axle-to-axle length ensures stability and accuracy, while its customizable modules allow for precise tuning to meet individual preferences.
1.2 Importance of Reading the Manual Before Use
Reading the Diamond Infinite Edge Pro Manual is crucial before using the bow to ensure safety, proper setup, and optimal performance. The manual provides detailed instructions for draw length and weight adjustments, tuning, and maintenance.
Understanding the safety guidelines and setup procedures prevents accidents and ensures the bow functions correctly. Whether you’re a novice or experienced archer, the manual offers essential insights to customize the bow to your needs and maintain its longevity.
By following the manual, you’ll achieve precise shots, avoid potential damage, and enjoy a seamless archery experience. Always refer to the manual before making any adjustments or repairs.
Setting Up and Assembling the Diamond Infinite Edge Pro
Setting up and assembling the Diamond Infinite Edge Pro involves unboxing, initial inspection, and step-by-step assembly. Properly aligning the cam modules ensures smooth operation and accuracy.
2.1 Unboxing and Initial Inspection
Begin by carefully unboxing the Diamond Infinite Edge Pro and inspecting all components for damage or defects. Ensure all parts, including the bow, limbs, cams, and accessories, are included and in good condition. Use a 7/64 inch hex wrench to prepare for adjustments. Check the draw length and weight settings, modules, and limb bolts for proper alignment. Verify that the cam modules are securely attached and aligned correctly. This initial inspection ensures a smooth assembly process and prevents potential issues down the line.
2.2 Step-by-Step Assembly Instructions
Start by attaching the limbs to the riser, ensuring they are securely fastened using the provided limb bolts. Tighten evenly to avoid misalignment. Next, install the cam modules by removing the module screws with a 7/64 inch hex wrench and attaching them to the cams. Align the modules properly and re-tighten the screws. Then, attach any additional accessories like the stabilizer or sight. Finally, verify the draw length and weight settings match your preferences before proceeding to tuning. Always refer to the manual for specific torque specifications to ensure a safe and accurate setup.
2.3 Adjusting the Cam Modules for Proper Alignment
Begin by using a 7/64 inch hex wrench to remove the module screws attaching the cam modules to the bow. Gently slide the modules into the desired position, ensuring proper alignment for optimal performance. Reattach the modules securely with the screws, tightening evenly to maintain balance. After adjustment, perform a paper tune or walk-back tune to verify arrow flight consistency. Proper cam alignment is crucial for accuracy and durability, so double-check the settings before shooting. Always refer to the manual for specific torque recommendations to prevent damage and ensure safety.
Adjusting Draw Length and Weight
Adjust the draw length using a 7/64 inch hex wrench to modify the cam modules, offering a range of 13-31 inches. For draw weight, turn the limb bolts to reduce weight as low as 22 lbs, ensuring proper torque for safety and performance.
3.1 Understanding Draw Length Settings (13-31 Inches)
The Diamond Infinite Edge Pro offers an adjustable draw length range of 13 to 31 inches, catering to archers of all skill levels and body sizes. Proper draw length ensures accuracy, comfort, and optimal performance. To adjust, use a 7/64 inch hex wrench to modify the cam modules, allowing customization to fit your shooting style. The module system provides precise settings, so you can fine-tune the bow to your preferences. Always refer to the manual for detailed instructions to achieve the perfect fit and maintain consistent shot dynamics. This feature makes the Infinite Edge Pro versatile for both hunting and recreational use.
3.2 How to Adjust Draw Weight (Down to 22 lbs)
Adjusting the draw weight on the Diamond Infinite Edge Pro is straightforward, allowing you to customize it to your strength and preference. To lower the draw weight, turn the limb bolts counterclockwise using an Allen wrench. Post A can reduce the weight as low as 22 lbs for younger shooters or those needing less force. Always check the weight with a bow scale to ensure accuracy. After adjustment, shoot a few arrows to verify consistency and performance. Proper draw weight adjustment enhances shooting comfort and accuracy, making the Infinite Edge Pro suitable for archers of varying skill levels and needs.
Tuning the Diamond Infinite Edge Pro
Tuning the Diamond Infinite Edge Pro ensures optimal performance and accuracy. This process involves adjusting the bow’s components to achieve perfect arrow flight and alignment, enhancing your shooting experience.
4.1 The Tuning Process Explained
The tuning process for the Diamond Infinite Edge Pro involves adjusting the bow to achieve optimal performance and accuracy. It begins with a series of precise adjustments to the bow’s components, such as the limb bolts and cam modules, to ensure proper alignment and arrow flight.
Paper tuning and walk-back tuning are essential steps, helping archers identify and correct any issues with arrow alignment or nocking point placement. This process ensures the bow is customized to the shooter’s form and style, maximizing efficiency and accuracy.
Regular tuning is crucial for maintaining consistent performance and extending the bow’s lifespan. By following the outlined steps, archers can fine-tune their Infinite Edge Pro to deliver precise shots every time.
4.2 Paper Tuning for Accuracy
Paper tuning is a critical step in ensuring the Diamond Infinite Edge Pro delivers precise shots. Shoot an arrow through a sheet of paper to analyze the tear pattern. A perfect shot creates a bullet hole, while irregular tears indicate misalignment.
Check for “nock high” or “nock low” tears and adjust the bow’s nocking point or rest accordingly. Ensure consistent shooting form and repeat the process until achieving a clean hole. This step ensures proper arrow alignment and maximizes accuracy for optimal performance.
4.3 Walk-Back Tuning for Optimal Performance
Walk-back tuning fine-tunes the Diamond Infinite Edge Pro for peak performance. Start by shooting at 10 yards and gradually increase the distance to 40 yards.
Analyze arrow impact points and adjust the bow’s sight pins accordingly. Ensure consistent arrow placement at each distance. This method ensures the bow is optimized for accuracy across various shooting ranges.
Repeat the process until arrow groups are tight and consistent at all distances, ensuring reliable performance in both hunting and target shooting scenarios.
Maintenance and Care
Regular maintenance ensures the Diamond Infinite Edge Pro’s longevity. Clean the bow regularly, inspect for wear, and lubricate moving parts. Replace strings and cables as needed.
5.1 Routine Maintenance for Longevity
Routine maintenance is crucial to ensure the Diamond Infinite Edge Pro performs optimally and lasts for years. Regularly clean the bow to remove dirt and debris, and inspect for wear on strings, cables, and limb bolts. Lubricate moving parts, such as the cam axles and limb pockets, to reduce friction and prevent corrosion. Replace strings and cables every 2-3 years or as needed. Store the bow in a dry place, away from direct sunlight, and avoid extreme temperatures. Proper care ensures reliability and accuracy, keeping your bow in prime condition for every shot.
5.2 Troubleshooting Common Issues
Common issues with the Diamond Infinite Edge Pro can often be resolved with simple adjustments. If experiencing string wear or inconsistent shots, inspect the string and cables for damage and replace them if necessary. For improper draw weight, ensure limb bolts are evenly torqued. If the bow is not shooting accurately, check cam alignment and module settings. Lubricate axles and pivot points if squeaking occurs. Addressing these issues promptly ensures consistent performance and prevents further damage. Regular checks and timely fixes will keep your bow functioning at its best.
Additional Features and Upgrades
The Diamond Infinite Edge Pro offers customization options, including stabilizer installation for better balance and personalized adjustments to enhance performance and comfort.
6.1 Installing a Stabilizer for Better Balance
To enhance balance and accuracy, install a stabilizer on the Diamond Infinite Edge Pro. Locate the mounting point on the bow’s riser and attach the stabilizer using a 7/64 inch hex wrench for secure fastening. Ensure proper alignment to maintain even weight distribution. Adjust the stabilizer’s position as needed to achieve optimal balance. Testing the bow’s stability after installation is crucial for performance. Follow the manual’s guidelines to avoid over-tightening, which could damage the equipment. This upgrade improves handling and shot consistency, tailoring the bow to your shooting style.
6.2 Customization Options for Personal Preference
Customize your Diamond Infinite Edge Pro to suit your archery style with various upgrades and accessories. Replace the stock strings with custom options for improved performance and reduced noise. Experiment with different cam modules to fine-tune draw length and weight settings. Additionally, consider adding a sight, arrow rest, or quiver to enhance functionality. Personalize the bow’s aesthetics with custom wraps or finishes. Always follow the manual’s guidelines when making modifications to ensure compatibility and maintain warranty. Testing the bow after customization is essential to ensure optimal performance and accuracy. These adjustments allow you to tailor the Infinite Edge Pro to your specific needs.
Safety Guidelines
Always adhere to safety guidelines when handling the Diamond Infinite Edge Pro to prevent accidents and ensure longevity. Proper handling, storage, and maintenance are essential for safe operation.
7.1 Essential Safety Precautions
Always wear protective gear, including arm guards and finger tabs, when shooting the Diamond Infinite Edge Pro. Ensure the draw weight is adjusted to your strength to avoid injury.
Never dry-fire the bow, as this can cause severe damage. Use arrows that match the bow’s specifications and inspect equipment regularly for wear or damage.
Store the bow in a dry, secure location, out of reach of children. Follow all local safety regulations and manufacturer guidelines for safe operation.
Handle the bow with care, especially when nocking or drawing arrows. Always maintain awareness of your surroundings to ensure a safe shooting environment.
7.2 Proper Handling and Storage
Handle the Diamond Infinite Edge Pro with care to prevent damage. Always store the bow in a cool, dry place, away from direct sunlight and extreme temperatures.
Use a protective bow case or bag to safeguard the bow during transport. Regularly inspect the bow for wear or damage before and after use.
Avoid leaving the bow strung for extended periods when not in use, as this can cause string fatigue. Store the bow unstrung to maintain its performance and longevity.
Ensure the bow is securely stored out of reach of children and unauthorized users to prevent accidents.
Technical Specifications
The Diamond Infinite Edge Pro features an IBO speed of 310 FPS, a mass weight of 3.2 lbs, and an axle-to-axle length of 31 inches.
- Draw length: 13-31 inches
- Draw weight: Adjustable down to 22 lbs
- Bow type: Hunting, Recreation
8.1 Key Specifications (IBO Speed, Mass Weight, Axle-to-Axle)
The Diamond Infinite Edge Pro boasts impressive technical specifications, ensuring high performance and versatility.
- IBO Speed: 310 FPS, delivering exceptional arrow velocity for precise shots.
- Mass Weight: 3.2 lbs, offering lightweight portability without compromising durability.
- Axle-to-Axle: 31 inches, providing a stable platform for consistent accuracy.
These specifications make it ideal for both hunting and recreational archery, catering to a wide range of shooters.
The Diamond Infinite Edge Pro Manual serves as your gateway to unlocking the full potential of this exceptional compound bow.
By following the detailed instructions and guidelines outlined in this manual, you’ll ensure optimal performance, safety, and longevity of your bow.
Whether you’re honing your archery skills or embarking on a hunting adventure, the Infinite Edge Pro is designed to deliver precision and reliability.
Remember to always prioritize proper maintenance and safety precautions to enhance your archery experience. Happy shooting!